Portable Power Supply for LiFePO4 Battery

1. Operating conditions
1) There is no severe vibration and shock. The inclination must not exceed 5 degrees.
2) The operating position should be well ventilated.
3) There should be no conductive or explosive dust, gas or steam at the operation site, otherwise it will corrode the metal or damage the insulation layer, causing strong electromagnetic interference.
4) The ambient temperature should be -10 ° C ~ + 40 ° C.
5) The maximum relative humidity should be less than 90%.
6) The average height of the ordinary charger does not exceed 1000 meters, and the average height of the high prototype charger does not exceed 3000 meters.

2.Type designation of charger

3.Working principle

Working diagram

The charger adopts high frequency switching rectifier power-supply module. The working process of the charger is controlled by microprocessor in real-time, automatic power on/off, simple operation, safe and reliable. The user can view the operation parameters and working status through the touch screen.

4.Technical Parameters

Input voltage: AC220V±10%  or  AC380V±10%    

Output voltage: DC 0~32V  or  DC 0~64V  

Output current: DC 0~80A  or  DC 0~240  

Voltage stabilized precision: ≤1%

Voltage stabilized precision: ≤1%

Noise: ≤60dB(1 meter after the close of front & back doors)

Cooling mode: Forced air cooling

5.General

PZDK series of intelligent chargers are a kind of intelligent charging device which is developed according to the technical requirement about the charging of the battery pack (group) used for AGVs (Automated Guided Vehicles). It uses the microprocessor as the main control unit, the color touch screen as the man-machine interface, with the function of flexible man-machine dialogue. It is suitable to perform the intelligent charge for AGVs and Other electric vehicles.

Our Other Product:

Product Categories : Battery Charger > LiFePO4 Battery Charger